Glass Optics Plasma Surface Treatment Plasma Cleaning Machine

Product Details
After-sales Service: 1 Year
Function: Abrasion Resistance
Demoulding: Pull Core
Diamond Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 RMB
  • Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
  • Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
  • Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
  • Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
  • Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
Find Similar Products

Basic Info.

Model NO.
MD-D5
Condition
New
Warranty
12 Months
Automatic Grade
Automatic
Installation
Vertical
Driven Type
Electric
Mould Life
>1,000,000 Shots
Power
500-800W
Input Power Supply
220V 50/60Hz
Rotary Spray Gun
5mm
Weight
12kg
Transport Package
Wooden Case/ Carton
Specification
140*370*420mm
Trademark
MINDER-HIGHTECH
Origin
Guangzhou-Guangdong
Production Capacity
1000sets/Month

Product Description

Introduction of Plasma:

Plasma is a state of existence of matter. Usually matter exists in three states: solid, liquid, and gas, but in some special cases, there is a fourth state, such as the matter in the ionosphere of the earth's atmosphere. The following substances exist in the plasma state: electrons in a high-speed motion state; neutral atoms, molecules, and atomic groups (radicals) in an activated state; ionized atoms and molecules; unreacted molecules, atoms, etc., but the substance is in the overall remains electrically neutral.

The atmospheric low temperature plasma processor is composed of plasma generator, gas delivery system, pressure protection system and plasma nozzle.

The plasma generator generates high-voltage high-frequency energy to ionize the air in the activated and controlled glow discharge in the nozzle steel pipe, resulting in a low-temperature plasma, and the plasma is sprayed to the surface of the workpiece with the help of compressed air. When the surfaces meet, a series of chemical actions and physical changes occur, and the surfaces are cleaned and hydrocarbon-based contaminants are removed.

Plasma treated surfaces can be used to obtain very thin high tension coated surfaces without the need for any other mechanical or chemical treatments to increase adhesion. Through low-temperature plasma surface treatment, various physical and chemical changes occur on the surface of the material, or etching and roughening, or the formation of a dense cross-linked layer, or the introduction of oxygen-containing polar groups to make hydrophilic and adhesive properties. , dyeability, biocompatibility and electrical properties were improved. The surface of the material is treated under suitable process conditions, so that the surface morphology of the material has changed significantly, and a variety of oxygen-containing groups have been introduced to make the surface change from non-polar, difficult to stick to a certain polarity, easy to stick and hydrophilic. It is good for bonding, coating and printing.

Glass Optics Plasma Surface Treatment Plasma Cleaning MachineGlass Optics Plasma Surface Treatment Plasma Cleaning MachineGlass Optics Plasma Surface Treatment Plasma Cleaning MachineGlass Optics Plasma Surface Treatment Plasma Cleaning Machine

Photo

 

   

Item No#

AP-WH+D5/50/80

AP-BE+D5/50/80

AP-BK+D5/50/80

Processing Width

5mm / 50mm / 80mm

5mm / 50mm / 80mm

5mm / 50mm / 80mm

Input Voltage

AC220V/50Hz

AC220V/50Hz

AC220V/50Hz

220V

220V

220V

Power Output

500W for 5mm

500W for 5mm

500W for 5mm

Frequency

20-50Khz

20-50Khz

20-50Khz

Air Pressure

4kg/0.4MPa

4kg/0.4MPa

4kg/0.4MPa

Gas Used

Air / N2

Air / N2

Air / N2

Cable Length

2m

2m

2m

Internal control mode

Digital control

Digital control

Digital control

External control mode

Analog control, on-off remote control

Analog control, on-off remote control

Analog control, on-off remote control


L×W×H

300*400*200mm

240*390*280mm

140*370*420mm

Weight

machine: 10.8kg

machine: 13.5kg

machine:  11.3kg

4mm nozzle+3m cable:  0.8kg

4mm nozzle+3m cable:  0.8kg

4mm nozzle+3m cable:  0.8kg

50mm nozzle+3m:  4.2kg

50mm nozzle+3m cable:  4.2kg

50mm nozzle+3m cable:  4.2kg

80mm nozzle+3m:  4.2kg

80mm nozzle+3m cable:  4.2kg

80mm nozzle+3m cable:  4.2kg

Warranty

1 year

1 year

1 year

Glass Optics Plasma Surface Treatment Plasma Cleaning MachineGlass Optics Plasma Surface Treatment Plasma Cleaning MachineGlass Optics Plasma Surface Treatment Plasma Cleaning MachineApplication:
Glass Optics Plasma Surface Treatment Plasma Cleaning MachineOther customization:
Glass Optics Plasma Surface Treatment Plasma Cleaning Machine
Frequently Asked Questions

1. About Price:
All of our prices are competitive and negotiable. The price varies depending on the configuration and customization complexity of your device.

2. About Sample:
We can provide sample production services for you, but you may provide some fees.

3. About Payment:
After the plan is confirmed, you need to pay us a deposit first, and the factory will start preparing the goods. After the equipment is ready and you pay the balance, we will ship it.

4. About Delivery:
After the equipment manufacturing is completed, we will send you the acceptance video, and you can also come to the site to inspect the equipment.

5. Installation and Debugging:
After the equipment arrives at your factory, we can dispatch engineers to install and debug the equipment. We will provide you with a separate quotation for this service fee.

6. About Warranty:
Our equipment has a 12-month warranty period. After the warranty period, if any parts are damaged and need to be replaced, we will only charge the cost price.
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier