Dual Station Pulse Heat Soldering Machine with Flux Dispensing and CCD

• Cooling Way: Air Cooling
• Control: Manual
• Style: Vertical
• Model NO.: mdr-2000-fluxdispensing
• Shielding Gas: Air
• Electric Current: Inverter
• Type: Multi-Station Hot-Press Welder
• Transport Package: Plywood
• Specification: 50kg
• Trademark: minder-hightech
• Origin: Guangzhou
• HS Code: 8515290000
• Production Capacity: 5000PCS/Year

Product Description

Product Description

 

Dual station Pulse heat hot bar soldering machine with flux dispensing and CCD and xy adjustment

PULSE HEAT HOT BAR SOLDERING MACHINE( type:dual station, with flux dispensing,with CCD,with fine adjustment device)

   procedure:load product to left station,push moving button,left station move to soldering station, fine adjust ffc to pcb position under CCD, push start button, start dispensing flux and 

start soldering, load product to right station, after soldering finished, push moving button, the right station goes to the soldering position, get off the product on the left station, and repeat.

contact us for details.

Principle:

 hot bar soldering machine also named  pulse heat unit/hot bar bonding machine/reflow soldering machine/heat pressure machine/thermo-compression machine is intended to solder electric components.

    It consists of a reflow head which holds down the object and applies pressure force and the pulse heat power supply which applies the current.

    Pulse heating is an instantaneous heating method. Heating is performed only when the solder is desired to be melted.
Electric current is applied to the iron to generate heat by resistance and the solder is melted. When the solder has melted, the current will be stopped and the solder is cooled. And when the solder has hardened, the heater tip is raised.

     Because the pressure is kept applied until the solder is hardened, highly reliable joining without lifting up can be achieved.

Part of welding sample:


Charactor:
 

1. IGBT inverter with 4kHz frequency.
2. Temperature closed loop control, feed back every 0.25ms.
3. Real time display temperature curve.
4. Upper and lower monitor of the temperature.
5. Easily operating. 
6. Overheat protection, overvoltage/undervoltage protection.
7. High precisely heating control system.
8. Two steps heating with upslope.
9. Ease for automation.
10. Saving power, 50% off than traditional AC soldering power.

Interface:

 

Specification:

Model/No	MDR-2000-XY
Input Voltage(V)	220
Duty cycle(%)	20
Rated power(KVA)	6
Heating Temp(°C)	50-600
Weight(Kg)	23
Heating steps	2
Thermode length(mm)	1-60
Head Force	20-200N

other model with different configration:


Some working video:
 

dual station left and right hot bar machine:   https://youtu.be/mhC-0Qk0E6U
thermocouple affect the heating:                   https://youtu.be/gtYYe89fdPA
thermocouple affect the heating:                   https://youtu.be/bw_V-EzwJjY
pulse heat machine working process:           https://youtu.be/PzTXfHhkkfI
hot bar soldering machine(feeding type):      https://youtu.be/NpaEuYpifdU
sample test with hot bar machine:                 https://youtu.be/IQThwdg2nIs
XYZ automatic hot bar soldering machine:    https://youtu.be/aWOe_vZMsmw

pulse heat hot bar operation introduction1:https://youtu.be/8_FQmVtPvNA
pulse heat hot bar operation introduction2:https://youtu.be/i2Ck-PiMR1o
customized dual machine for dual position on 1 workpiece hot bar soldering:https://youtu.be/0Da_XVTVTxI
-------------------------------------------------------------------------------------------------------------------------------------------------------------------

guangzhou minder-hightech co.,ltd
contact:shunyu.hu