| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Device Model: | Mdbts-5V60A |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Device model | MDBTS-5V60A | Single channel Output power |
300W | communication method | TCP/IP (Network port) | ||
| Discharge voltage | 5V-0.8V | Charging voltage | DC0-5V | data record | 100mS~65535 S | ||
| Recharging current | 5Vseries:0.02A~60A | Discharge current | 5Vseries:0.02A~60A | ||||
| Current accuracy | ±(0.05%RD+0.05%FS) | Voltage accuracy | ±(0.05%RD+0.05%FS) | ||||
| Voltage resolution | The smallest unit used by lmV equipment when detecting or setting voltage | ||||||
| Electric current resolution | The smallest unit used by lmA equipment when detecting or setting voltage | ||||||
| Charging mode | Constant current charging Constant voltage charging constant power charging | ||||||
| Discharge mode | Constant current dischargeConstant power discharge | ||||||
| Charging cut-off condition |
Voltage,current,time, capacity,temperature | Discharge cut-off condition |
Voltage,current,time,capacity,temperature | ||||
5V60A battery testing equipment
| Input power | AC220±10%/50Hz(Cabinet power supply mode: three-phase five-wire) | ||
| Main temperature | 1 channel per channel can be selected according to the specific equipment | ||
| input resistance | ≥10MQ | ||
| Current response time | Current rise time≤50mS | Power accuracy | ±(0.05%RD+0.05%FS) |
| Number of steps in a single cycle | ≤100step,With nested loop function | ||
| Circuit configuration | Modular structure design, easy replacement and maintenance | ||
| VCELL,TCELL | Optional auxiliary temperature, auxiliary voltage, single module 8 channels, can be arbitrarily mapped to each main channel Temperature range: -40~140°(Voltage range: 0~5V/0~20V) | ||
| performance | index parameter | ||
| Input power | AC220V±10%/50Hz | ||
Voltage |
Measuring range | 0.75~5V | |
| Output range | 10mV~5V | ||
| Precision | ±0.1%*FSR | ||
| Output accuracy | ±0.1%*FSR | ||
Current |
Measuring range | 0~60A | |
| Output range | 50mA~60A | ||
| Measurement accuracy | ±0.1%*FSR | ||
| Output accuracy | ±0.1%*FSR | ||
Power |
Measuring range | 0~24000W | |
| Output range | 0~24000W | ||
| Measurement accuracy | ±0.2%*FSR | ||
| Output accuracy | ±0.2%*FSR | ||
Data probability |
Sampling rate | 1HZ:1 samples/sec | |
| Recording rate | 1HZ:1 point/sec | ||
| Recording conditions | TIVtemp | ||
| Full-scale current response time | ≤30ms | ||
| Time resolution | 1s | ||
| input resistance | ≥1MOhm | ||
| Support charge and discharge type | Constant current charging, constant voltage charging, constant current and constant voltage charging, constant power charging, constant load discharging, constant power discharging, support channel paralleling | ||
| Number of test commands | 399 commands can be set, 65535 loops can be set, 5 levels of nested loops are supported | ||
| communication method | Ethernet,100Mbps | ||
| safety protection | hardware | Add anti-reverse connection module to prevent battery reverse connection | |
| software | 1 Power-down data protection 2Support the setting of protection conditions: voltage upper limit, voltage lower limit, current upper limit, current lower limit, capacity upper limit, energy upper limit, voltage change rate, delay protection, temperature upper limit, temperature lower limit |
||
| Calibration frequency | ≥1year | ||
| Fan noise | ≤85db | ||
| Number of channels per chassis | 8aisles | ||
){kind=link}