The equipment is small in size, light in weight, high in efficiency, low in power consumption and fast in heating
Low temperature around the furnace, no smoke, good working environment, no noise
The operation process is simple and the melting operation is reliable
Uniform heating temperature, less burning loss, uniform metal composition
Stainless steel pot body can reach a minimum of 24 months without cracking, infrared heating mode, easy control of furnace temperature, high production efficiency
Metal die casting machine zinc furnace, using infrared heating technology, stainless steel melting pot, energy saving effect is better than high-frequency electromagnetic heating method, but the maintenance is far more convenient than high-frequency heating, and the failure rate is very low, simple maintenance can be maintained by non-professionals. Compared with resistance furnace, oil furnace saving effect is more than 30% superior. The reasonable price allows you to recover the cost saved by energy saving within half a year.
The advantages and disadvantages of die casting furnace using infrared internal heating technology and other heating technology are compared as follows: Comparison with high frequency induction cooker:
High frequency induction cooker in the utilization rate of heat is relatively high, but its maintenance is particularly complex, general technical personnel can not repair, if there is a fault must be professional maintenance, so the maintenance cost is relatively high.
When the high-frequency induction cooker is working, the coil itself will also generate a lot of heat, so it will consume a lot of electricity. It also needs a fan for its own heat dissipation, and the wind will consume part of the energy. Each electromagnetic heating furnace has at least 5-6 fans.And when the fan is running, it makes a lot of noise.
When the induction cooker is working for a period of time, the aging or failure of the fan will easily lead to the failure of the circuit board. The failure of the circuit board requires the replacement of 1GBT with higher cost (mostly imported original).
Experimental data of our company: 400KG zinc material, from greenhouse to complete melting temperature of 420 degrees, takes 90 minutes, electricity consumption 36 degrees, average cost of less than 0.1 yuan per kilogram. Under the same conditions, high-frequency induction cooker takes 120 minutes, electricity consumption: about 45 degrees. In time, the infrared furnace can save 30 minutes, and in power, the infrared furnace can save 9 ° electricity per hour.
Audited Supplier 
){kind=link}