Mdv760 SMT Automatic Flying Needle First-Article Inspection Machine

• After-sales Service: 1 Year
• Warranty: 1 Year
• Specification: 300kg
• Trademark: minder-hightech
• Origin: Guangzhou
• Model NO.: MDV760
• HS Code: 8015809090
• Production Capacity: 200PCS/Yearpcs/Year

Product Description

MDV760 SMT Automatic Flying needle First-Article Inspection Machine
What's automatic high-speed flying needle first-article inspection machine?
*It is an automatic testing device for the quality inspection of the first piece of PCB substrate before mass production;
*To avoid large quantities of defective caused by error SMT components due to process and operation problems.
*Automatically measure the mounting parts of double-sided board, automatic switch gear, automatic frequency modulation, automatic judgment of test results;meanwhile it has the function of PCBA test after furnace.
*For non-LCR materials,fast automatic identification of boardingmark and automatic polarity contrast test Through the Camera image acquisition technology
*Overturn the traditional manual clamping test method, the machine automatic clamping test is 3 to 5 times faster than the traditional FAI first test instrument.
*Automatically generate detailed test report
Test principle:
LCR components:
       By moving the probe on the arm of the Z axis machinery according to the size of the component size, automatically adjust the spacing of probe, move the test probe to the component electrode, let probe in contact with the chip position, automatically connect to the LCR communication according to the properties of the component itself, the software automatically control the LCR frequency and gear, read the LCR meter data automatically. Automatic measurement, automatic check with BOM standard value, automatically judge the test results.
NON-LCR components
HD camera is used to obtain high-definition images of PCBA in real time, and the components are magnified dozens of times, boardingmark and polarity are automatically compared.
NC components
HD camera is used to automatically navigate and quickly check whether there are multiple mounted components.
Test process:
Main parameter

Test report: