| Type: | Resistance Butt Welder |
|---|---|
| Transport Package: | Standard Export Wooden Case Packing |
| Specification: | 980(L)*460(W)*1500(H)mm |
| Trademark: | Minder |
| Origin: | China |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier Specification
This ultrasonic spot welder is designed for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors
to prepare Li-ion pouch cells in Li-ion pouch cells & cylindrical cells. The max layers of electrodes can reach 130.
Advantages
* High-quality ultrasonic transducer, strong power, good stability.
* Good conductivity and resistivity very low or almost near to zero.
* Oxidation or plating metal can be welded.
* Short weld time, no need additional flux, gas, solder.
* No welding sparks, environment protection and safety.
* Without the need for frequent replacement of amplifier due to stepless adjustment of the amplitude.
* Low energy consumption, high efficiency, no distortion, no pollution, welding firm, and convenient operation.
* Welding material does not melt non-fragile metal properties.
* Pairs of welding metal surfaces that require low, oxidation or plating can be welded.
Application
* Multi-layer positive and negative electrode welding for dynamic power battery
welding material does not melt, non-fragile metal properties.
* Li-ion battery and polymer battery: Copper foil welds nickel sheet; Aluminum foil welds aluminum sheet; Aluminum foil welds
Nickle sheet.
* Auto splice welding, Formation of electric wire end, Welding for electric wires; Multiple electric wires bond welding.
* Electric wire and cable welding, terminal , connector , electric parts welding .
* Solar panel battery, flat solar plate , copper and aluminum plate joints.
* Solenoid switch, fuseless switch: big currency joint point welding and dissimilar metal welding.
* Refrigerator and air conditioner copper tube sealing. Vacuum parts of copper tube and aluminum tube sealing.In addition, advances in metals technology are producing thinner and lighter metal foils and wire for use in sensitive electronics
and other products. Ultrasonic metal welding can satisfy the clean and delicate requirements of these applications, whereas
traditional welding methods may be much too destructive.
Ultrasonic welding also meets the reliability demands of larger, heavy-duty applications such as charging systems for electric
vehicles, wind power towers and solar energy systems.
Feathers
* Microcomputer control, electronic tuning frequency.
* Power adjustable, operate simple, and run stable and reliable.
* LED display keeps the machine visible in operation and regulation.
* Imported components, good performance in energy output.
* Overcurrent protection and soft start can keep the machine safe.
* Easy installation and operation.
* Not only similar metal, but also dissimilar all can welding together. it can weld metal slice or sleave to thick metal. Usually used for transister or IC's leads welding.
Technical parameters
| Frequency | 20KHz Nominal |
| Source Voltage | AC110V/220V±10%V 50/60±10%Hz |
| Power | Available in 2000W~5000W |
| Welding Thickness | 0.03-5mm AI and Ni tab welding Aluminum/Copper foll |
| Welding Size | Standard side is 5×5mm, can also customized according request |
| Max,Welding Layers | 220 |
| Pneumatic Pressure | 0.3-0.6Mpa |
| Generator Type | Digital automatic frequency tracking, generator can be adjusted the output amplitude from 5% to 100% |
| Size | Controller: 420mm(L) * 380mm(W) *200mm(H) Welder: 510mm(L) *280mm(W) *210mm(H) |
| Weight | Welder : 35~50kg, Controller : 10kg |
| Warranty | One year warranty with lifetime support |
If you need more further details about our machines, please feel free to contact us .
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}