- Type: Ultrasonic
- Cutting Mode: Ultrasonic
- Trademark: minderhightech
- HS Code: 8468200010
- Control Mode: Manual
- Torch Type: None
- Origin: Guangzhou
Ultrasonic Metal Welder uses ultrasonic frequency vibration principle to change ultrasonic vibration energy into friction energy and transfer to the metal surface to be welded, while the friction produces heat under their pressure, the cold mill and horizontal movement of surface molecules on the material permeability relative to each other together to achieve the purpose of welding.
Ultrasonic Metal Welder built-in electronic protection circuits, use of safe, able to implement a single point or multi-point non-ferrous metal welding; widely used in batteries and metal products industry.
Ultrasonic Welding Principle:
l Ultrasonic metal welding machine use ultrasonic frequency vibration principle to change ultrasonic vibration energy into friction energy and transfer to the metal surface to be welded ,while the friction produces heat under the pressure, the metal structure of molecules fully activation of the fusion between the molecular layer of the formation of the new equipment.
l Microcomputer control, electronic tuning frequency.
l Power adjustable, operate simple, and run stable and reliable.
l Low energy consumption, high efficiency, no deformation, no pollution, firm welding, convenient operation.
l LED display keeps the machine visible in operation and regulation.
l Imported components, good performance in energy output.
l Overcurrent protection and soft start can keep the machine safe.
l Easy installation and operation.
l Not only similar metal, but also dissimilar all can welding together. it can weld metal slice or sleave to thick metal. Usually used for transister or IC's leads welding.
l High-quality ultrasonic transducer, strong power, good stability.
l Good conductivity and resistivity very low or almost near to zero.
l Oxidation or plating metal can be welded.
l Short weld time, no need additional flux, gas, solder.
l No welding sparks, environment protection and safety.
l Without the need for frequent replacement of amplifier due to stepless adjustment of the amplitude.
l Low energy consumption, high efficiency, no distortion, no pollution, welding firm, and convenient operation.
l Welding material does not melt non-fragile metal properties.
l Good conductivity and resistivity very low or almost zerot.
l Pairs of welding metal surfaces that require low, oxidation or plating can be welded.
l No welding sparks, environmental protection and safety.
AC 110/220±10% V 50/60±10% Hz
One Year limited warranty with lifetime support
Ultrasonic metal welding machine
Pneumatic, with air supply 0.3-0.6Mpa
Max. Welding Section Area of Wire
Adopt the solid crystal type, with functions of automatic frequency tracking With overcurrent, overheating, mismatch alarm
Controller: 420mm(L) * 380mm(W) *200mm(H)
Welder: 510mm(L) *280mm(W) *210mm(H)
Welder : 35kg, Controller : 10kg
l Multi-layer positive and negative electrode welding for dynamic power battery
welding material does not melt, non-fragile metal properties.
l Li-ion battery and polymer battery: Copper foil welds nickel sheet; Aluminum foil welds aluminum sheet; Aluminum foil welds Nickle sheet.
l Auto splice welding, Formation of electric wire end, Welding for electric wires; Multiple electric wires bond welding.
l Electric wire and cable welding, terminal , connector , electric parts welding .
l Solar panel battery, flat solar plate , copper and aluminum plate joints.
l Solenoid switch, fuseless switch: big currency joint point welding and dissimilar metal welding.
l Refrigerator and air conditioner copper tube sealing. Vacuum parts of copper tube and aluminum tube sealing.
In addition, advances in metals technology are producing thinner and lighter metal foils and wire for use in sensitive electronics and other products. Ultrasonic metal welding can satisfy the clean and delicate requirements of these applications, whereas traditional welding methods may be much too destructive.
Ultrasonic welding also meets the reliability demands of larger, heavy-duty applications such as charging systems for electric vehicles, wind power towers and solar energy systems.
1. Package with foam and wooden case
2. Size: Controller: 620(W)*580(L)*400(H) mm
Welder: 710(W)*480(L)*410(H) mm
3. Weight: 65kg